Feed
Equipment
DH
Series Dry Polymer Preparation System
 |
The
Dry Polymer Preparation Systems are designed for dependable
operation. Years of field experience with dry polymer preparation,
combined with the knowledge of the leading manufacturer of
water-soluble polymers, is incorporated into every design.
Polymer Wetting Assembly / Dust Control Module
simply uses water to:
• Contain the polymer particles to prevent
dust
buildup
• Disperse the powder to prevent
agglomerations
• Hydraulically shear the product to begin
proper activation
• Transport the solution to the mix tank |
Options
•
Allen-Bradley™ PLC and Panelview™ Touchscreen Operator Interface**
•
Air compressor if plant air is not available
* Consult your SNF Floquip Representative for system
sizing.
** Allen-Bradley™ PLC and Panelview™ are registered trademarks of
Rockwell Automation.
System Parameters
• 100-300
lbs./day (45-135 kg/day)*
• 0.4-8.34
lbs./minute dry polymer feed rate (0.18-3.8 kg/min)*
Features
• Simple Installation and Operation
• Dust-free Polymer Wetting Assembly
• Solution without formation of agglomerations or "fish-eyes"
• 2.5 cu. ft. Stainless Steel hopper
• Automatic rinse cycle
• Low Water Flow Protection
• Manual and Automatic operation
Utilities
•
70-100 gpm (265-380 L/min), 40-70 psi (2.7-4.8 bar) required
primary dilution
water
•
120V, 30A required for preparation unit - Agitator and Transfer
Pumps as required
•
80 psi (5.5 bar), 30 scfm instrument air required - integral air
compressor optional
* Using 48 lbs/cu.ft. and a 0.25% concentration for
high molecular weight, anionic powders. Process capacity is based on
specific tank sizes and age times. Consult your local polymer sales
representative for chemical specifications
| D |
H |
1 |
C |
0 |
| |
H - Hopper for 50 lbs. (25 kg) sacks |
1 - (1) Mix tank,
(1) Application tank
2 - (2) Mix/application tanks, (2) agitators |
O - Plant air required
C - Air compressor provided
E - Electric
ball valve |
0 - No rapid fill
required
R- Rapid fill valve |
|
Weight:
561 lbs. (255 kg)Dimensions: (L x W x H)
4' (1220mm)
x 4' (1220mm)
x 4.4' (1340mm)
Connections:
Water - 1 1/2” NPT
Solution - 2” NPT |
|
|
